SN74LS175D Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. As part of the package Tube, it is embedded. As configured, the output uses Differential. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The JK flip flop operates at a voltage of 4.75V~5.25V. In the operating environment, the temperature is 0°C~70°C TA. This D latch has the type D-Type. The FPGA belongs to the 74LS series. It should not exceed 40MHzin terms of its output frequency. A total of 1 elements are present. T flip flop consumes 18mA quiescent energy. There have been 16 terminations. The 74LS175 family contains this object. An input voltage of 5Vpowers the D latch. The electronic device belongs to the LSfamily. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 16 pins. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The design is based on 4bits. A power supply of 5Vis required to operate it. For high efficiency, the supply voltage should be set to 5V. Its output current of 8mAallows for maximum design flexibility. In order for the chip to function, it has 2output lines. There are 4 channels available.

SN74LS175D Features

Tube package
74LS series
16 pins
4 Bits
5V power supplies

SN74LS175D Applications

There are a lot of Texas Instruments SN74LS175D Flip Flops applications.

• High Performance Logic for test systems
• Single Down Count-Control Line
• Communications
• Cold spare funcion
• Data transfer
• Convert a momentary switch to a toggle switch
• Balanced Propagation Delays
• Pattern generators
• Divide a clock signal by 2 or 4
• Synchronous counter