MM74HCT574WMX Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74HCT series. Its output frequency should not exceed 33MHz Hz. The list contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. Currently, there are 20 terminations. Members of the 74HCT574family make up this object. It is powered by a voltage of 5V . A 10pFfarad input capacitance is provided by this T flip flop. HCTis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. 8bits are used in its design. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. An electrical current of 5V volts is applied to it. The flip flop contains 2ports. For high efficiency, the supply voltage should be set to 5V. There are 3 output lines in this JK flip flop. Currently, there are 8 channels available.

MM74HCT574WMX Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies

MM74HCT574WMX Applications

There are a lot of ON Semiconductor MM74HCT574WMX Flip Flops applications.

• Communications
• Computing
• Control circuits
• Memory
• Load Control
• Counters
• Computers
• Single Up Count-Control Line
• High Performance Logic for test systems
• Instrumentation