MM74HCT74N Overview

As a result, it is packaged as 14-DIP (0.300, 7.62mm). You can find it in the Tubepackage. As configured, the output uses Differential. JK flip flop uses Positive Edgeas the trigger. In this case, the electronic component is mounted in the way of Through Hole. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. Its output frequency should not exceed 27MHz Hz. During its operation, it consumes 2μA quiescent energy. The 74HCT74family includes it. The input capacitance of this JK flip flopis 5pF farads. In this case, the electronic component is mounted in the way of Through Hole. This board has 14 pins. This device's clock edge trigger type is Positive Edge. Despite its superior flexibility, it relies on 2 circuits to achieve it. In addition to its maximum design flexibility, the output current of the T flip flop is 4.8mA. To operate, the chip has a total of 1 output lines.

MM74HCT74N Features

Tube package
74HCT series
14 pins

MM74HCT74N Applications

There are a lot of ON Semiconductor MM74HCT74N Flip Flops applications.

• Event Detectors
• Buffer registers
• ESCC
• Individual Asynchronous Resets
• Frequency division
• Safety Clamp
• Convert a momentary switch to a toggle switch
• Balanced Propagation Delays
• ATE
• Storage Registers