A clock integrated circuit is packaged in a Tape & Reel (TR)-shaped package because it is for use as a clock. The 16-SOIC (0.154, 3.90mm Width) package contains this clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. 16 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. The input of this clock generator is designed to be Clock. To access the electronic component's full performance, 1 circuits are implemented. The frequency generator has a maximum frequency of 133.3MHz. With the Surface Mount, it is easy to install this electric component on the panel. Clock PLL is capable of receiving a maximum of 3.6V as a supply voltage. Keeping the supply voltage for this frequency synthesizer above 3V is recommended for safety reasons. In terms of supply voltage, RF synthesizer works with 3V~3.6V. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. This electronic component can be classified as a Zero Delay Buffer. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. This part number is related to its related electronic parts. There is an available 16 pin on the PLL. Electronic frequency generator can handle voltages up to 3.3V. There is a low timing skew at 0.2 nsmax with this RF synthesizer. 8 pins enable the digital clock generator's true output. At a frequency of 133MHz, the system can achieve high efficiency. This clock generator operation can supply up to 60mA of current.
NB2308AI1DR2G Features
Available in the 16-SOIC (0.154, 3.90mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V 8 true outputs
NB2308AI1DR2G Applications
There are a lot of ON Semiconductor NB2308AI1DR2G Clock Generators applications.