NB3L8533DTR2G Overview

It is package in 20-TSSOP (0.173, 4.40mm Width) case. It is available in the case Tape & Reel (TR). It is recommended that the maximum value for normal operation is 650MHz. A total of 20 terminations are present. Supply voltages of 2.5V enable high efficiency. If this is the case, it will be mounted as Surface Mount. There is a classification of Fanout Buffer (Distribution), Multiplexer for this electronic part. If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. It should be capable of operating with a power supply of 2.375V~3.63V volts. This item is positioned in the way of Surface Mount. As a result, the output is LVPECL. There is an embedded device in Clock Drivers containing this circuit clock. The gadget belongs to the NB3 family of clock buffers. The maximum supply voltage (Vsup) is set to 3.63V. A voltage higher than 2.375V is necessary for normal operation of the system. It is powered by a 2.5/3.3V volt supply.

NB3L8533DTR2G Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

NB3L8533DTR2G Applications

There are a lot of ON Semiconductor NB3L8533DTR2G Clock Buffers & Drivers applications.

• Network attached storage
• Edge computing
• Other PCIe Gen2 networking applications
• Clock signal level shifting
• Machine made
• DDR4 JEDEC standard LRDIMM design
• Synchronous optical network (SONET)
• Fibre channel (FC)
• Patient diagnosis
• Zero crossing detector