2.5V Clock Divider 3GHz NB6L239 Clock Generators ECLinPS MAX? Series 16 Pins 16-VFQFN Exposed Pad 16 Terminals Surface Mount 2.375V~3.465V Tape & Reel (TR)
SOT-23
NB6L239MNR2 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-VFQFN Exposed Pad
Number of Pins
16
Operating Temperature
-40°C~85°C
Packaging
Tape & Reel (TR)
Published
2008
Series
ECLinPS MAX™
JESD-609 Code
e0
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Type
Clock Divider
Subcategory
Clock Drivers
Technology
ECL
Voltage - Supply
2.375V~3.465V
Terminal Position
QUAD
Peak Reflow Temperature (Cel)
240
Number of Functions
1
Supply Voltage
2.5V
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
30
Base Part Number
NB6L239
Output
LVPECL
Pin Count
16
Supply Voltage-Max (Vsup)
3.465V
Power Supplies
2.5/3.3V
Supply Voltage-Min (Vsup)
2.375V
Number of Circuits
1
Frequency (Max)
3GHz
Family
6L
Input
CML, HSTL, LVDS, LVPECL
Ratio - Input:Output
1:2
PLL
No
Differential - Input:Output
Yes/Yes
Prop. [email protected]
0.6 ns
Propagation Delay (tpd)
0.57 ns
Divider/Multiplier
Yes/No
fmax-Min
3000 MHz
Same Edge Skew-Max (tskwd)
0.03 ns
Length
3mm
Width
3mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
NB6L239MNR2 Product Details
NB6L239MNR2 Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 16-VFQFN Exposed Pad package. This clock generator ic can sustain a maximum temperature of 240 during reflowing. It contains a total of 16 terminations within RF synthesizer. Basically, this time clock generator needs a voltage of 2.5V. In this clock generator, CML, HSTL, LVDS, LVPECL is used as the input to the clock. To access the electronic component's full performance, 1 circuits are implemented. An upper frequency limit of 3GHz Max can be achieved with this clock-based frequency synthesizer. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 3.465V is the maximum supply voltage needed by this time clock generator. Keeping the supply voltage for this frequency synthesizer above 2.375V is recommended for safety reasons. There are 2.375V~3.465V available for use with this clock PLL. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. As the name suggests, this is a clock generator that is compatible with LVPECL logic levels. A Clock Divider is a classification for the electronic part in question. Clock PLL is equipped with 16 pin count. You can find related electrical components to the base part number NB6L239. The clock PLL has 16 pins that are available. The device is usually classified as a type of Clock Drivers device. There is an electronic part in this series that belongs to the ECLinPS MAX? family. As a result of this digital clock generator, there is a low timing skew at 0.03 ns max. By searching for parts that belong to the 6L family, you can find electronic parts that are similar.
NB6L239MNR2 Features
Available in the 16-VFQFN Exposed Pad Supply voltage of 2.5V
NB6L239MNR2 Applications
There are a lot of ON Semiconductor NB6L239MNR2 Clock Generators applications.