NC7SB3157P6X Overview

Shipping overseas is convenient due to the electrical component's packing in 6-TSSOP, SC-88, SOT-363. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. There is an analog multiplexer mounted in position Surface Mount. Multiplexer and demultiplexer circuits have a number 2:1. Around -40°C~85°C TA is the extended operating temperature. Totally, there are 6 terminations. The electronic part provides high-quality output because it has 1 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. A SPDT switching circuit is used for these analog switches. It consists of 1 circuits. Using the 7SB3157 search parameter, you can discover variants of the switch. In this multiplexer, the internal resistance is 50Ohm. To find out what the functions of 6 pins are, please refer to their datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Single supply type digital switch with a low cost. It is recommended to use 1.65V as the lowest voltage for the electrical part. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. A digital multiplexer may suffer damage if voltage is applied above 1μA. Among the inputs that can be operated are the 2 inputs. The data can be transferred over a wide range of bandwidths, called 250MHz bandwidths. Resistivity from Drain to Source is 7Ohm for this electronic part.

NC7SB3157P6X Features

1 Channels
Switch Circuit: SPDT
Bandwidth: 250MHz
Drain-to-Source resistance: 7Ohm

NC7SB3157P6X Applications

There are a lot of ON Semiconductor NC7SB3157P6X Analog Switches & Multiplexers ICs applications.

• Cable PC
• Avionics test equipment
• Isolation
• ATM
• Access Concentrators
• Microprocessor controlled systems
• DSLAMs
• USB 1.1 signal switching circuits
• Sample hold systems
• Communication systems