NC7SZ74K8X Overview

8-VFSOP (0.091, 2.30mm Width)is the packaging method. Package Tape & Reel (TR)embeds it. As configured, the output uses Differential. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. The supply voltage is set to 1.65V~5.5V. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 7SZ series. You should not exceed 200MHzin the output frequency of the device. A total of 8terminations have been recorded. D latch belongs to the 7SZ74 family. The power source is powered by 1.8V. This T flip flop has a capacitance of 3pF farads at the input. Devices in the LVC/LCX/Zfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. As you can see from the design, it has pins with 8. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. There are 1bits in its design. Considering the reliability of this T flip flop, it is well suited for TR. The D latch runs on a voltage of 3.3V volts. It offers maximum design flexibility with its output current of 32mA. There are no output lines on the JK flip flop. In terms of quiescent current, it consumes 1μA . A total of 1 channels are available.

NC7SZ74K8X Features

Tape & Reel (TR) package
7SZ series
8 pins
1 Bits
3.3V power supplies

NC7SZ74K8X Applications

There are a lot of ON Semiconductor NC7SZ74K8X Flip Flops applications.

• Count Modes
• CMOS Process
• Data Synchronizers
• Computing
• Data storage
• ESD protection
• Reduced system switching noise
• Data transfer
• Synchronous counter
• Instrumentation