10 Terminals 4.5V~13.2V 10-Pin NCP1589 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver
SOT-23
NCP1589LMNTWG Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
16 Weeks
Lifecycle Status
ACTIVE (Last Updated: 3 days ago)
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
10-VFDFN Exposed Pad
Number of Pins
10
Operating Temperature
0°C~95°C TA
Packaging
Tape & Reel (TR)
Published
2011
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
10
ECCN Code
EAR99
Additional Feature
OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V
Subcategory
Switching Regulator or Controllers
Terminal Position
DUAL
Terminal Pitch
0.5mm
Base Part Number
NCP1589
Function
Step-Down
Number of Outputs
1
Output Voltage
400mV
Output Type
Transistor Driver
Operating Supply Voltage
12V
Input Voltage-Nom
5V
Analog IC - Other Type
SWITCHING CONTROLLER
Operating Supply Current
2.5mA
Nominal Supply Current
2.5mA
Output Configuration
Positive
Output Current
1.5A
Voltage - Supply (Vcc/Vdd)
4.5V~13.2V
Control Features
Enable, Power Good
Input Voltage (Min)
4.5V
Topology
Buck
Control Mode
CURRENT-MODE
Control Technique
PULSE WIDTH MODULATION
Synchronous Rectifier
Yes
Switcher Configuration
PUSH-PULL
Max Frequency
500kHz
Max Duty Cycle
83 %
Clock Sync
No
Length
3mm
Width
3mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$0.580556
$0.580556
10
$0.547694
$5.47694
100
$0.516693
$51.6693
500
$0.487446
$243.723
1000
$0.459855
$459.855
NCP1589LMNTWG Product Details
NCP1589LMNTWG Overview
It comes in a 10-VFDFN Exposed Pad package, so switching controller can be used for most applications. dc motor controller is suitable for 1 output generation. Tape & Reel (TR) solid enclosure protects the pmic. The program can handle Transistor Driver dc switching's outputs (s). A 4.5V~13.2V voltage is supplied to the dc control and used for operating it. Suitable for work in a 0°C~95°C TA dc switcher. The Surface Mount makes it ideal for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Power Good. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . An array of 10 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. You can find other relevant dc to dc converter ics by searching "NCP1589". 10 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. As determined by the test statistics, the output voltage of DC regulator is 400mV. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 83 % during power-up and power-down. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator has a maximum frequency of 500kHz. For better satisfaction, the value of DC to DC voltage regulator is OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V. It runs on a supply current of 2.5mA. There is a nominal current supply of 2.5mA for this the controllers dc.
NCP1589LMNTWG Features
Transistor Driver Outputs Enable, Power Good PULSE WIDTH MODULATION Max Duty Cycle: 83 % OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 5V
NCP1589LMNTWG Applications
There are a lot of ON Semiconductor NCP1589LMNTWG DC to DC converter applications.