TL3842DR-8 Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Cut Tape (CT) rating. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 10V~30V. Worked in a 0°C~70°C TA dc switcher before. Using this switching controller, it is possible to switch at Up to 500kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Frequency Control. An analog IC with the SWITCHING REGULATOR signal is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of 8 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. Searching "TL3842" will return other relevant dc to dc converter ics. Total pins of switching converter are 8. Specially, switching converter corresponds to type Switching Regulator or Controllers. Based on the test statistics, DC regulator outputs voltage 30V. normally, the dc dc regulator's output current is 200mA, which you should keep in mind when starting a project. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 100 %. Switching controller operates at a frequency of 500kHz. As long as the dc switching is in a dormant state, it utilizes 11mA. For nominal working status, the input voltage can be set as 5.5V. There is a requirement for a 15V supply voltage. There should be 30mA current exceeding 30mA supplied to the controller.

TL3842DR-8 Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

TL3842DR-8 Applications

There are a lot of Texas Instruments TL3842DR-8 DC to DC converter applications.

• Terrestrial set-top boxes
• Automation technology
• Wide-range voltage regulation circuits
• Shearing machines
• Injection molding machinery
• Remotely powered electric motors
• Lathes
• Computer rooms
• Milling machines
• Radio equipment