NCP302HSN18T1 Overview

There are 5 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. It is possible to find on this power management a series of 1 channels. There are SOT-23-5 Thin, TSOT-23-5 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 240. When 1.5V is applied to the power ic, it conducts. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 5 pins in it. The pins of the power management system count 5. IC management can only work with a supply voltage of 800mV volts. There should be no more than 10V volts of supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 500nA volt supply current. It is always advisable to use NCP302, the base supervisor number, when searching for similar PMICs from the manufacturer.

NCP302HSN18T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP302HSN18T1 Applications

There are a lot of ON Semiconductor NCP302HSN18T1 Voltage Supervisors applications.

• Power communication system
• Unattended substation automation
• Multi-voltage system
• Microprocessor system
• Set top box
• Solar power charger
• Power distribution systems of operating room
• Refrigeration
• Kitchen appliances
• Power distribution systems of infant care room