NCP304HSQ30T1 Overview

A total of 4 terminals are used to mount this power management. Power management is packaged in a Tape & Reel (TR) way. For your reference, this IC power includes a list of 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-82A, SOT-343 functions. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 240. There is a voltage supply of 1.5V for the PMIC chip, and the chip conducts at that voltage. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. A total of 4 pins are located on this power management. This power management has 4 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 800mV, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~85°C TA . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 1μA volt supply current. To find similar IC managements from the manufacturer, you can always search by NCP304.

NCP304HSQ30T1 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
1μA operating supply current

NCP304HSQ30T1 Applications

There are a lot of ON Semiconductor NCP304HSQ30T1 Voltage Supervisors applications.

• Electric heating appliances
• Radio
• Transformer load monitoring equipment
• Dash board
• Stable power system
• Medical-specific isolation transformer
• External alarm
• Battery cars
• Precision measurement
• Urban rail transit weak current power monitoring