NCV33204DTBR2 Overview
There is a 14-TSSOP (0.173, 4.40mm Width) case in which the instrumentation amplifier is packaged. There are two types of operational amplifiers in this circuit. The case in which buffer amplifier is delivered is called a Tape & Reel (TR) case. A total of 14 terminations have been reported in the past few weeks. In this case, there are 14 pins on the board. Please take in mind that op amp should be run at 5V. A type of Operational Amplifiers buffer op amp is what this device is specifically, to be more precise. In total, the buffer amplifier consists of 14 pins. Op amp ic rates 10mV for input offset voltage. The mounting type that is recommended for this electrical part is Surface Mount. It is recommended that this op amp ic be operated at a temperature no higher than -55°C~125°C for optimal performance. An 1.125mA volt supply current is needed for this linear amplifier to operate. It is recommended to keep the voltage gain at 109.54dB at all times. This op amp contains 4 circuits. Buffer amplifier produces Rail-to-Rail signals, which is one of its many benefits. The operating supply voltage of the buffer op amp is rated at 6V. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted. The Automotive, AEC-Q100 indicates the series number of the op amp.
NCV33204DTBR2 Features
14 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail
NCV33204DTBR2 Applications
There are a lot of ON Semiconductor NCV33204DTBR2 Instrumentational OP Amps applications.
- Addition operation circuits
- Weak signal detection
- RF cable systems
- Precision measurement
- Subtraction operation circuits
- Inverse/same-phase proportional circuit
- Proportional operation circuits
- Signal operation
- Automatic control
- Signal amplification
