NLV14027BDG Overview

The flip flop is packaged in a case of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tube package. As configured, the output uses Differential. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 3V~18Vis required for its operation. The operating temperature is -55°C~125°C TA. Logic flip flops of this type are classified as JK Type. JK flip flop is a part of the 4000Bseries of FPGAs. There should be no greater frequency than 13MHzon its output. A total of 2 elements are present. Despite external influences, it consumes 4μAof quiescent current. There are 16 terminations,You can search similar parts based on 4027. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 5pF farads. A part of the electronic system is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device's clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. For normal operation, the supply voltage (Vsup) should be kept above 3V.

NLV14027BDG Features

Tube package
4000B series
16 pins

NLV14027BDG Applications

There are a lot of ON Semiconductor NLV14027BDG Flip Flops applications.

• Communications
• Bounce elimination switch
• Storage registers
• Bus hold
• 2 – Bit synchronous counter
• High Performance Logic for test systems
• Frequency Dividers
• Circuit Design
• Synchronous counter
• Set-reset capability