UC3843BVDR2 Overview

It comes in the 14-SOIC (0.154, 3.90mm Width) package, which makes switching controller suitable for most applications. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. The program can handle Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 7.6V~30V. Work well in dc switchers with a -40°C~105°C TA. With this switching controller, you can switch at Up to 500kHz. The Surface Mount allows it to be used for dc dc regulator in general. Frequency Control is used for efficient switching control in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of 14 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 15V. Searching "UC384*B" will return other relevant dc to dc converter ics. 14 pins are on switching converter. Switching converter is a special type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 5.1V voltage. At most, the dc to dc regulator accepts 25V input voltage. normally, the dc dc regulator's output current is 1A, which you should keep in mind when starting a project. The maximum duty cycle of this voltage regulator dc to dc is set to 96 % to ensure reliability during power-up and power-down. Switching controllers operate at 60kHz frequencies. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 30V. Dormant dc switchings use 12mA.

UC3843BVDR2 Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 96 %
Frequency: 60kHz

UC3843BVDR2 Applications

There are a lot of ON Semiconductor UC3843BVDR2 DC to DC converter applications.

• Constant current circuits
• Grinders
• Experimental setup
• Linear guide
• Die casting equipment
• CMM
• Product burn-in
• Handheld GPS
• Adjustable voltage or current linear circuits
• Large fire protection systems