UCC2800DG4 Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 1 numbers. Packaging for the pmic consists of Tube solid enclosures. Transistor Driver dc switching's outputs (s) can be handled by it. Voltages 6.9V~12V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 46kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . 8 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 10V. In addition to "UCC2800", there are other relevant dc to dc converter ics you can find. There are a total of 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. An input voltage of 7.5V is the minimum required for the dc dc voltage regulator. According to the test statistics, DC regulator outputs 5.075V voltage. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. The duty cycle of the voltage regulator dc to dc can be set to 100 % on power-up or power-down to ensure reliability. DC switcher's Surface Mount qualifies it for most applications and prototypes. A frequency of 1MHz is set for the switching controller. A supply voltage of 10V is required. There should be 25mA more than 25mA amps of current supplied to the controller. An input of 500μA current flow could satisfy the operation of the switching converter .

UCC2800DG4 Features

Transistor Driver Outputs
Switching Frequency: 46kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 1MHz

UCC2800DG4 Applications

There are a lot of Texas Instruments UCC2800DG4 DC to DC converter applications.

• Photovoltaic power
• Driver circuits
• Hydrogen power
• Electric heating, lighting
• Radio equipment
• Ball screw pair
• Wide-range voltage regulation circuits
• PSRR circuits
• Industrial controllers
• Solar power plants