3.6V~34V 16-Pin AN8014S DC to DC converter IC 1 Outputs 218kHz Transistor Driver
SOT-23
AN8014S-E1 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.173, 4.40mm Width)
Number of Pins
16
Supplier Device Package
16-SOP
Operating Temperature
-30°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2002
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Max Operating Temperature
85°C
Min Operating Temperature
-30°C
Base Part Number
AN8014S
Function
Step-Up, Step-Down
Number of Outputs
1
Output Voltage
35V
Output Type
Transistor Driver
Output Configuration
Positive or Negative
Voltage - Supply (Vcc/Vdd)
3.6V~34V
Output Power
143mW
Control Features
Dead Time Control, Enable, Frequency Control
Topology
Buck, Boost
Frequency - Switching
218kHz
Synchronous Rectifier
No
Max Duty Cycle
52 %
Duty Cycle (Max)
52%
Clock Sync
No
Output Phases
1
Number of Output Phases
1
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$0.715991
$0.715991
10
$0.675464
$6.75464
100
$0.637230
$63.723
500
$0.601161
$300.5805
1000
$0.567133
$567.133
AN8014S-E1 Product Details
AN8014S-E1 Overview
In the 16-SOIC (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tape & Reel (TR) solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 3.6V~34V volts and has 3.6V~34V supply voltage. Suitable for working in an dc switcher that has a -30°C~85°C TA. It can switch at 218kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. To provide efficient switching control, Dead Time Control, Enable, Frequency Control is included in the dcdc regulator. In addition to "AN8014S", there are other relevant dc to dc converter ics you can find. There are 16 pins on switching converter. DC regulator outputs 35V voltage based on test statistics. Voltage regulator dc to dc is designed to operate at 52 % duty cycle during power-ups and power-downs to ensure reliability. You should keep dc regulator at -30°C degrees or higher. There should be 85°C temperature above 85°C degrees Celsius when dc regulator runs. There would be 16-SOP supplier dc dc controller package for this part. During switching, this controller has a phase of 1.
AN8014S-E1 Features
Transistor Driver Outputs Switching Frequency: 218kHz Dead Time Control, Enable, Frequency Control Max Duty Cycle: 52 %
AN8014S-E1 Applications
There are a lot of Panasonic Electronic Components AN8014S-E1 DC to DC converter applications.