1.8V~14V 10-Pin AN8016NSH DC to DC converter IC1 Outputs 2kHz~1MHz Transistor Driver
SOT-23
AN8016NSH-E1 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
10-FSOP (0.169, 4.30mm Width)
Number of Pins
10
Supplier Device Package
10-SSOP
Operating Temperature
-30°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2007
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Max Operating Temperature
85°C
Min Operating Temperature
-30°C
Base Part Number
AN8016NSH
Function
Step-Up
Number of Outputs
1
Output Voltage
15V
Output Type
Transistor Driver
Output Configuration
Positive
Output Current
50mA
Voltage - Supply (Vcc/Vdd)
1.8V~14V
Output Power
115mW
Control Features
Enable, Soft Start
Topology
Boost
Frequency - Switching
2kHz~1MHz
Synchronous Rectifier
No
Max Frequency
1MHz
Duty Cycle (Max)
80%
Clock Sync
No
Output Phases
1
RoHS Status
RoHS Compliant
Lead Free
Lead Free
AN8016NSH-E1 Product Details
AN8016NSH-E1 Overview
This switching controller fits most application requirements since it is packaged in a 10-FSOP (0.169, 4.30mm Width) package. 1 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's1.8V~14V is the operating voltage and supply voltage of the dc control. Suitable for work in a -30°C~85°C TA dc switcher. There is a switch at 2kHz~1MHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Soft Start. AN8016NSH can be searched for other relevant dc to dc converter ics. Total pins of switching converter are 10. DC regulator outputs 15V voltage according to the test statistics. normally, the dc dc regulator's output current is 50mA, which you should keep in mind when starting a project. It is estimated that this dc regulatorhas a maximum frequency of 1MHz. At least -30°C°C is recommended. There should be 85°C more than 85°C degrees Celsius in the machine. It would be 10-SSOP for this part's supplier dc dc controller package.