TL494CPWG4 Overview

In the 16-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. dc motor controller is suitable for 2 output generation. PMIC packaging is solid with a Tube enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. 7V~40V is the operating voltage and supply voltage of the dc control. Suitable for working in an dc switcher that has a 0°C~70°C TA. The switching controller is capable of switching at the 1kHz~300kHz position. It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Dead Time Control, Frequency Control. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 15V. Searching "TL494" will return other relevant dc to dc converter ics. There are a total of 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. This dc dc voltage regulator should be powered by a voltage of 7V. DC regulator outputs 40V voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 200mA, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 45 % during power-up and power-down. 300kHz is the frequency of the switching controller. Switching controller is necessary to provide a voltage of 15V.

TL494CPWG4 Features

Transistor Driver Outputs
Switching Frequency: 1kHz~300kHz
Dead Time Control, Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
Frequency: 300kHz

TL494CPWG4 Applications

There are a lot of Texas Instruments TL494CPWG4 DC to DC converter applications.

• Correction machines
• Fire elevators
• SMT equipment
• Thermal power
• Computed tomography (CT)
• Constant current circuits
• Product burn-in
• Die casting equipment
• Boring machines
• Flaw detection equipment