MAX704TCSA+ Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 8 in total. Tube-packaging is used. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. The purpose of this IC power is to provide you with a reference of 8-SOIC (0.154, 3.90mm Width) functions. Several of the benefits of this PMIC are also shared by other Battery Backup Circuit products. Packages are specified to have an average peak reflow temperature of 260. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. A total of 8 pins are located on this power management. 8 pins make up the power management. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: 0°C~70°C TA. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. For this power management, there is an 350μA volt supply current. A similar IC managements number of the manufacturer can always be found by using MAX704, the base power ics number. In order to operate this power management, it requires 3/5V volts of power.

MAX704TCSA+ Features

Battery Backup Circuit type
Minimum supply voltage of 1V
350μA operating supply current

MAX704TCSA+ Applications

There are a lot of Maxim Integrated MAX704TCSA+ Voltage Supervisors applications.

• Leakage current detection
• Rechargeable batteries
• Automotive power systems
• Power communication system
• Personal computers
• Refrigeration
• Computer applications
• Transformer load monitoring equipment
• Sensitive sensors
• Analog circuit