74ACT821SCX Overview

24-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is contained within the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~85°C TAis used in the operation. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74ACT series. A frequency of 150MHzshould not be exceeded by its output. A total of 1 elements are present. During its operation, it consumes 80μA quiescent energy. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V is used to power it. Its input capacitance is 4.5pF farads. It belongs to the family of electronic devices known as ACT. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be above 4.5V. The D flip flop has no ports embedded.

74ACT821SCX Features

Tape & Reel (TR) package
74ACT series

74ACT821SCX Applications

There are a lot of Rochester Electronics, LLC 74ACT821SCX Flip Flops applications.

• Shift registers
• Frequency Dividers
• Data Synchronizers
• Count Modes
• Functionally equivalent to the MC10/100EL29
• Set-reset capability
• ESCC
• Clock pulse
• Guaranteed simultaneous switching noise level
• Shift Registers