74ACTQ574SCX Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). Tri-State, Non-Invertedis the output configured for it. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. -40°C~85°C TAis the operating temperature. D-Typedescribes this flip flop. It is a type of FPGA belonging to the 74ACTQ series. There should be no greater frequency than 85MHzon its output. The list contains 1 elements. There is 40μA quiescent consumption. A total of 20terminations have been recorded. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 4.5pF farads. In this case, the D flip flop belongs to the ACTfamily. There is a 5.5Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. A total of 2ports are embedded in the D flip flop. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 374.

74ACTQ574SCX Features

Tape & Reel (TR) package
74ACTQ series

74ACTQ574SCX Applications

There are a lot of Rochester Electronics, LLC 74ACTQ574SCX Flip Flops applications.

• Storage Registers
• Buffered Clock
• Buffer registers
• Memory
• Safety Clamp
• Guaranteed simultaneous switching noise level
• ESCC
• Dynamic threshold performance
• Bounce elimination switch
• Pattern generators