CY74FCT574TQCT Overview

20-SSOP (0.154, 3.90mm Width)is the packaging method. It is contained within the Cut Tape (CT)package. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74FCTseries of FPGAs. There are 1 elements in it. As a result, it consumes 200μA quiescent current and is not affected by external forces. There are 20 terminations,The object belongs to the 74FCT574 family. The D flip flop is powered by a voltage of 5V . A JK flip flop with a 5pFfarad input capacitance is used here. Electronic devices of this type belong to the FCTfamily. The electronic part is mounted in the way of Surface Mount. The 20pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. 8bits are used in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. It operates with 3 output lines. The frequency that can be achieved is 250MHz.

CY74FCT574TQCT Features

Cut Tape (CT) package
74FCT series
20 pins
8 Bits
5V power supplies

CY74FCT574TQCT Applications

There are a lot of Texas Instruments CY74FCT574TQCT Flip Flops applications.

• QML qualified product
• Set-reset capability
• Common Clocks
• Single Up Count-Control Line
• Storage Registers
• Frequency division
• Registers
• Digital electronics systems
• CMOS Process
• Shift Registers