74LVX174M Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. A package named Tubeincludes it. T flip flop is configured with an output of Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 2V~3.6Vis used as the supply voltage. Temperature is set to -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74LVXseries of FPGAs. In order for it to function properly, its output frequency should not exceed 95MHz. A total of 1elements are contained within it. Despite external influences, it consumes 4μAof quiescent current. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The D flip flop is powered by a voltage of 2.7V . This JK flip flop has a 4pFfarad input capacitance. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.

74LVX174M Features

Tube package
74LVX series

74LVX174M Applications

There are a lot of Rochester Electronics, LLC 74LVX174M Flip Flops applications.

• Count Modes
• CMOS Process
• Balanced 24 mA output drivers
• Supports Live Insertion
• Cold spare funcion
• Divide a clock signal by 2 or 4
• Data transfer
• Convert a momentary switch to a toggle switch
• Automotive
• Circuit Design