CD74HC74M96 Overview

The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. There is an embedded version in the package Cut Tape (CT). This output is configured with Differential. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. It is at -55°C~125°C TAdegrees Celsius that the system is operating. This logic flip flop is classified as type D-Type. The 74HCseries comprises this type of FPGA. A frequency of 50MHzshould be the maximum output frequency. Terminations are 14. If you search by 74HC74, you will find similar parts. The D flip flop is powered by a voltage of 4.5V . The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic device belongs to the HC/UHfamily. There is an electronic part that is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. This device exhibits a clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. There is a 6Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 2V. 2 circuits are used to achieve its superior flexibility. On the basis of its reliable performance, this D flip flop is well suited for use with TR. With a current output of 25mA , it offers maximum design flexibility. In order for the chip to function, it has 1output lines. It consumes 4μA current.

CD74HC74M96 Features

Cut Tape (CT) package
74HC series
14 pins

CD74HC74M96 Applications

There are a lot of Texas Instruments CD74HC74M96 Flip Flops applications.

• Registers
• Storage Registers
• Modulo – n – counter
• Individual Asynchronous Resets
• Count Modes
• Bounce elimination switch
• Pattern generators
• Storage registers
• Dynamic threshold performance
• EMI reduction circuitry