ADF4208BRU-REEL Overview

As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. This clock generator is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 240. 20 terminations can be found in frequency synthesizer. Basically, a voltage of 3V should be applied to this electronic frequency generator. CMOS is designed as this clock generator's input. This clock-based frequency generator provides a frequency up to 2GHz Max. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage this clock generator would take is 5.5V. The supply voltage for this frequency synthesizer should be kept above 2.7V for safety considerations. Clock PLL works with 2.7V~5.5V supply voltage provided. It may cause ha85°Cards once the operating temperature for the device is set in excess of 85°C. This frequency generator may fail to start up if the ambient temp is lower than -40°C. This is a clock generator compatible with Clock logic levels. This electronic component can be classified as a Clock/Frequency Synthesizer (RF). This clock-generating IC is a 20-bit device designed explicitly for microprocessors. For better clock signal output, this clock PLL is featured with DUAL MODULUS PRESCALER (RF): 32/33, 64/65.

ADF4208BRU-REEL Features

Available in the 20-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3V

ADF4208BRU-REEL Applications

There are a lot of Rochester Electronics, LLC
ADF4208BRU-REEL Clock Generators applications.

• Instrument
• Automatic test equipment
• Wide area power system
• Digital circuits
• Wireless base station for LTE, LTE-advanced
• Picocells, femtocells and small cells
• Sampling clocks for ADC and DAC
• 1 Gigabit Ethernet
• 10 Gigabit Ethernet
• FPGA and processor clocks