CD74ACT175E Overview

It is packaged in the way of 16-DIP (0.300, 7.62mm). D flip flop is embedded in the Tube package. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. Through Holemounts this electrical part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at -55°C~125°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74ACTseries of FPGAs. It should not exceed 114MHzin terms of its output frequency. The list contains 1 elements. As a result, it consumes 8μA quiescent current. It has been determined that there have been 16 terminations. Power is supplied from a voltage of 5V volts. Its input capacitance is 10pF farads. An electronic device belonging to the family ACTcan be found here. Vsup reaches 5.5V, the maximal supply voltage.

CD74ACT175E Features

Tube package
74ACT series

CD74ACT175E Applications

There are a lot of Rochester Electronics, LLC CD74ACT175E Flip Flops applications.

• Data transfer
• Instrumentation
• Single Up Count-Control Line
• Convert a momentary switch to a toggle switch
• ATE
• Individual Asynchronous Resets
• Frequency Dividers
• Bus hold
• Memory
• Count Modes