74HCT273PW-Q100J Overview

20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. The Tape & Reel (TR)package contains it. T flip flop is configured with an output of Non-Inverted. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The 74HCTseries comprises this type of FPGA. In order for it to function properly, its output frequency should not exceed 36MHz. In total, it contains 1 elements. Terminations are 20. You can search similar parts based on 74HCT273. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 3.5pF farads. This D flip flop belongs to the family of HCT. The electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. A Positive Edgeclock edge trigger is used in this device. Flip flops designed with 8bits are used in this part. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With an output current of 25mA, this device offers maximum design flexibility. A total of 8input lines have been provided. This D latch consumes 8μA quiescent current at all.

74HCT273PW-Q100J Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits

74HCT273PW-Q100J Applications

There are a lot of Nexperia USA Inc. 74HCT273PW-Q100J Flip Flops applications.

• Individual Asynchronous Resets
• Clock pulse
• Communications
• ESD protection
• High Performance Logic for test systems
• Divide a clock signal by 2 or 4
• Cold spare funcion
• Differential Individual
• Memory
• Shift registers