CD74HC173PWT Overview

16-TSSOP (0.173, 4.40mm Width)is the packaging method. The package Tape & Reel (TR)contains it. Tri-State, Non-Invertedis the output configured for it. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 2V~6V. A temperature of -55°C~125°C TAis considered to be the operating temperature. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74HC series. A frequency of 60MHzshould not be exceeded by its output. A total of 1elements are present in it. During its operation, it consumes 8μA quiescent energy. A total of 16 terminations have been made. It is powered from a supply voltage of 4.5V. A 10pFfarad input capacitance is provided by this T flip flop. The electronic device belongs to the HC/UHfamily. It reaches the maximum supply voltage (Vsup) at 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. In addition, you can refer to the additinal WITH DUAL OUTPUT ENABLE of the D latch.

CD74HC173PWT Features

Tape & Reel (TR) package
74HC series

CD74HC173PWT Applications

There are a lot of Rochester Electronics, LLC CD74HC173PWT Flip Flops applications.

• Reduced system switching noise
• Memory
• Data transfer
• Buffer registers
• Matched Rise and Fall
• ESD performance
• Data storage
• Consumer
• Asynchronous counter
• Buffered Clock