74HC74DB,118 Overview

In the form of 14-SSOP (0.209, 5.30mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. It is configured with Differentialas an output. Positive Edgeis the trigger it is configured with. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 2V~6V. A temperature of -40°C~125°C TAis used in the operation. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74HCseries of FPGAs. Its output frequency should not exceed 82MHz. Despite external influences, it consumes 40μAof quiescent current. Terminations are 14. The 74HC74 family contains it. Power is supplied from a voltage of 5V volts. Its input capacitance is 3.5pFfarads. A device of this type belongs to the family of HC/UH. Surface Mount mounts this electronic component. The 14pins are designed into the board. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. In this case, the maximum supply voltage (Vsup) reaches 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. The superior flexibility of this product is achieved by using 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. There are 1 output lines in this JK flip flop. It consumes 80μA current.

74HC74DB,118 Features

Tape & Reel (TR) package
74HC series
14 pins

74HC74DB,118 Applications

There are a lot of Nexperia USA Inc. 74HC74DB,118 Flip Flops applications.

• Single Up Count-Control Line
• Circuit Design
• Consumer
• Data storage
• Test & Measurement
• Buffer registers
• Latch
• Event Detectors
• Frequency Divider circuits
• Control circuits