CD74HC377E Overview

The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). You can find it in the Tubepackage. T flip flop is configured with an output of Non-Inverted. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Through Hole. It operates with a supply voltage of 2V~6V. -55°C~125°C TAis the operating temperature. D-Typedescribes this flip flop. JK flip flop is a part of the 74HCseries of FPGAs. A frequency of 60MHzshould be the maximum output frequency. The list contains 1 elements. Despite external influences, it consumes 8μAof quiescent current. There have been 20 terminations. It is powered by a voltage of 5V . A JK flip flop with a 10pFfarad input capacitance is used here. A device of this type belongs to the family of HC/UH. Vsup reaches 6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be kept above 2V. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.

CD74HC377E Features

Tube package
74HC series

CD74HC377E Applications

There are a lot of Rochester Electronics, LLC CD74HC377E Flip Flops applications.

• Clock pulse
• Consumer
• Bounce elimination switch
• Test & Measurement
• Asynchronous counter
• Common Clocks
• 2 – Bit synchronous counter
• Storage registers
• Frequency Divider circuits
• Safety Clamp