DM74ALS374N Overview

20-DIP (0.300, 7.62mm)is the way it is packaged. There is an embedded version in the package Tube. As configured, the output uses Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Through Hole. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. The operating temperature is 0°C~70°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74ALSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 35MHz. A total of 1elements are contained within it. T flip flop consumes 19mA quiescent energy. 20terminations have occurred. Power is provided by a 5V supply. ALSis the family of this D flip flop. Vsup reaches its maximum value at 5.5V. The supply voltage (Vsup) should be maintained above 4.5V for normal operation. The flip flop has 2ports embedded within it.

DM74ALS374N Features

Tube package
74ALS series

DM74ALS374N Applications

There are a lot of Rochester Electronics, LLC DM74ALS374N Flip Flops applications.

• Synchronous counter
• Data Synchronizers
• Matched Rise and Fall
• Shift Registers
• Balanced Propagation Delays
• Modulo – n – counter
• Latch-up performance
• Bus hold
• Computers
• Dynamic threshold performance