SN74HC109NSR Overview

The flip flop is packaged in 16-SOIC (0.209, 5.30mm Width). It is included in the package Tape & Reel (TR). This output is configured with Differential. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. Powered by a 2V~6Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. There is JK Type type of electronic flip flop associated with this device. In terms of FPGAs, it belongs to the 74HC series. Its output frequency should not exceed 60MHz. During its operation, it consumes 4μA quiescent energy. A total of 16terminations have been recorded. Members of the 74HC109family make up this object. It is powered by a voltage of 5V . There is 3pF input capacitance for this T flip flop. This D flip flop belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. This board is designed with 16pins on it. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. There is a 6Vmaximum supply voltage (Vsup). It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Using 2 circuits, it is highly flexible. Due to its reliability, this T flip flop is well suited for TR. High efficiency requires the supply voltage to be maintained at 5V. With an output current of 5.2mA, this device offers maximum design flexibility. In order for the chip to function, it has 3output lines. Additionally, you may refer to the D latch's additional DUMMY VAL.

SN74HC109NSR Features

Tape & Reel (TR) package
74HC series
16 pins

SN74HC109NSR Applications

There are a lot of Texas Instruments SN74HC109NSR Flip Flops applications.

• Frequency division
• Differential Individual
• Storage registers
• Dynamic threshold performance
• Synchronous counter
• ESCC
• Clock pulse
• Matched Rise and Fall
• Shift Registers
• Single Down Count-Control Line