MC74AC273NG Overview

The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). As part of the package Tube, it is embedded. The output it is configured with uses Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis occupied by this electronic component. A voltage of 2V~6Vis required for its operation. It is operating at -40°C~85°C TA. This D latch has the type D-Type. In this case, it is a type of FPGA belonging to the 74AC series. Its output frequency should not exceed 175MHz Hz. A total of 1 elements are present. This process consumes 8μA quiescents. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. A voltage of 5V provides power to the D latch. The input capacitance of this JK flip flopis 4.5pF farads. Electronic devices of this type belong to the ACfamily. There is a 6Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation.

MC74AC273NG Features

Tube package
74AC series

MC74AC273NG Applications

There are a lot of Rochester Electronics, LLC MC74AC273NG Flip Flops applications.

• Digital electronics systems
• Modulo – n – counter
• Registers
• Single Down Count-Control Line
• CMOS Process
• Computing
• Storage Registers
• Storage registers
• Frequency Divider circuits
• Single Up Count-Control Line