MC74AC574DW Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. Powered by a 2V~6Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 95MHzshould not be exceeded by its output. A total of 1elements are contained within it. Despite external influences, it consumes 8μAof quiescent current. 20terminations have occurred. Power is supplied from a voltage of 5V volts. Its input capacitance is 4.5pFfarads. In this case, the D flip flop belongs to the ACfamily. It reaches 6Vwhen the supply voltage is maximal (Vsup). For normal operation, the supply voltage (Vsup) should be kept above 2V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
MC74AC574DW Features
Tube package
74AC series
MC74AC574DW Applications
There are a lot of Rochester Electronics, LLC MC74AC574DW Flip Flops applications.
- Balanced Propagation Delays
- Bus hold
- Computing
- Convert a momentary switch to a toggle switch
- Single Up Count-Control Line
- Modulo – n – counter
- Asynchronous counter
- Control circuits
- ESCC
- Registers
