MC74HCT374ADWR2 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. It is operating at a temperature of -55°C~125°C TA. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. It should not exceed 30MHzin its output frequency. In total, there are 1 elements. Currently, there are 20 terminations. An input voltage of 5Vpowers the D latch. The electronic device belongs to the HCTfamily. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be kept above 4.5V. There are 2 ports embedded in the flip flops.
MC74HCT374ADWR2 Features
Tape & Reel (TR) package
74HCT series
MC74HCT374ADWR2 Applications
There are a lot of Rochester Electronics, LLC MC74HCT374ADWR2 Flip Flops applications.
- Instrumentation
- Power down protection
- Registers
- Event Detectors
- Digital electronics systems
- Individual Asynchronous Resets
- Differential Individual
- Counters
- High Performance Logic for test systems
- Convert a momentary switch to a toggle switch
