Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74ABT534APWE4

SN74ABT534APWE4

SN74ABT534APWE4

Texas Instruments

4.5V~5.5V 175MHz 8 Bit D-Type Flip Flop DUAL 74ABT534 20 Pins 250μA 74ABT Series 20-TSSOP (0.173, 4.40mm Width)

SOT-23

SN74ABT534APWE4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature-40°C~85°C TA
PackagingTube
Series 74ABT
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Type D-Type
Subcategory FF/Latches
Technology BICMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Supply Voltage 5V
Terminal Pitch0.65mm
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74ABT534
Function Standard
Qualification StatusNot Qualified
Output Type Tri-State, Inverted
Number of Elements 1
Polarity Inverting
Supply Voltage-Max (Vsup) 5.5V
Power Supplies5V
Supply Voltage-Min (Vsup) 4.5V
Number of Ports2
Number of Bits 8
Clock Frequency 175MHz
Propagation Delay6.7 ns
Turn On Delay Time4.5 ns
Family ABT
Logic Function D-Type, Flip-Flop
Current - Quiescent (Iq) 250μA
Current - Output High, Low 32mA 64mA
Max I(ol) 0.064 A
Max Propagation Delay @ V, Max CL 6.7ns @ 5V, 50pF
Trigger Type Positive Edge
Input Capacitance3.5pF
Number of Input Lines 8
Number of Output Lines 3
Clock Edge Trigger Type Positive Edge
Length 6.5mm
Width 4.4mm
RoHS StatusROHS3 Compliant
In-Stock:4584 items

SN74ABT534APWE4 Product Details

SN74ABT534APWE4 Overview


The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). A package named Tubeincludes it. This output is configured with Tri-State, Inverted. JK flip flop uses Positive Edgeas the trigger. Surface Mountmounts this electrical part. With a supply voltage of 4.5V~5.5V volts, it operates. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. JK flip flop is a part of the 74ABTseries of FPGAs. You should not exceed 175MHzin the output frequency of the device. In total, it contains 1 elements. There is 250μA quiescent consumption. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ABT534family includes it. The power source is powered by 5V. This T flip flop has a capacitance of 3.5pF farads at the input. In terms of electronic devices, this device belongs to the ABTfamily of devices. Electronic part Surface Mountis mounted in the way. 20pins are included in its design. This device has the clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. Flip flops designed with 8bits are used in this part. 5.5Vis the maximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 4.5V. The power supply is 5V. The flip flop has 2ports embedded within it. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It is reported that there are 8 input lines.

SN74ABT534APWE4 Features


Tube package
74ABT series
20 pins
8 Bits
5V power supplies

SN74ABT534APWE4 Applications


There are a lot of Texas Instruments SN74ABT534APWE4 Flip Flops applications.

  • Control circuits
  • Convert a momentary switch to a toggle switch
  • Communications
  • Pattern generators
  • EMI reduction circuitry
  • Registers
  • Storage registers
  • Test & Measurement
  • Memory
  • Modulo – n – counter

Get Subscriber

Enter Your Email Address, Get the Latest News