MC74LCX74DR2 Overview

The package is in the form of 14-SOIC (0.154, 3.90mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Differential. The trigger it is configured with uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 2V~3.6Vvolts. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. In this case, it is a type of FPGA belonging to the 74LCX series. A frequency of 150MHzshould not be exceeded by its output. The element count is 2 . Despite external influences, it consumes 10μAof quiescent current. A total of 14 terminations have been made. The power source is powered by 2.5V. JK flip flop input capacitance is 7pF farads. It is a member of the LVC/LCX/Zfamily of D flip flop. As soon as 3.6Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be above 2V.

MC74LCX74DR2 Features

Tape & Reel (TR) package
74LCX series

MC74LCX74DR2 Applications

There are a lot of Rochester Electronics, LLC MC74LCX74DR2 Flip Flops applications.

• Computers
• EMI reduction circuitry
• Synchronous counter
• Storage Registers
• Load Control
• Convert a momentary switch to a toggle switch
• ATE
• Latch-up performance
• Individual Asynchronous Resets
• Instrumentation