MC74VHC374DTR2 Overview

The package is in the form of 20-TSSOP (0.173, 4.40mm Width). There is an embedded version in the package Tape & Reel (TR). This output is configured with Tri-State, Non-Inverted. It is configured with the trigger Positive Edge. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~5.5V. A temperature of -40°C~85°C TAis used in the operation. This electronic flip flop is of type D-Type. In this case, it is a type of FPGA belonging to the 74VHC series. There should be no greater frequency than 120MHzon its output. A total of 1elements are contained within it. During its operation, it consumes 4μA quiescent energy. 20terminations have occurred. An input voltage of 3.3Vpowers the D latch. A JK flip flop with a 4pFfarad input capacitance is used here. Electronic devices of this type belong to the AHC/VHCfamily. It reaches the maximum supply voltage (Vsup) at 5.5V. Normally, the supply voltage (Vsup) should be above 2V. The D flip flop has no ports embedded.

MC74VHC374DTR2 Features

Tape & Reel (TR) package
74VHC series

MC74VHC374DTR2 Applications

There are a lot of Rochester Electronics, LLC MC74VHC374DTR2 Flip Flops applications.

• Parallel data storage
• Reduced system switching noise
• Guaranteed simultaneous switching noise level
• Set-reset capability
• Single Down Count-Control Line
• Test & Measurement
• Automotive
• Counters
• Frequency Dividers
• Communications