NB100LVEP224FAG Overview

There is a case of 64-LQFP Exposed Pad in which it is packaged. There is a Tray packaged with it. In normal operation, 1GHz is the maximum value. In it, there are 64 terminations. Using a supply voltage of 2.5V allows for high efficiency. A mount of Surface Mount has been applied to it. Electronic components classified as Fanout Buffer (Distribution), Multiplexer fall into this category. It is recommended to set the temperature to -40°C~85°C in order to achieve reliable performance. The clock switch should operate with a voltage of 2.375V~3.8VV. On this board, there is a pin count of 64. There is ECL, PECL output from clock driver. The maximum supply voltage (Vsup) is set to 3.8V. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 2.375V. Electronic components of the 100LVEP series are included in this package. In addition, NECL MODE: VCC=0 WITH VEE = -2.375V TO -3.8V can be obtained when using this gadget.

NB100LVEP224FAG Features

64 terminations
The operating temperature of -40°C~85°C degrees

NB100LVEP224FAG Applications

There are a lot of Rochester Electronics, LLC NB100LVEP224FAG Clock Buffers & Drivers applications.

• Synchronous optical network (SONET)
• Network attached storage
• Clock signal level shifting
• Big data
• Network
• Fibre channel (FC)
• Gigabit Ethernet (GbE)
• Clock signal duplication
• Line receiver and signal recovery
• Oscilloscope and logic analyzer front ends