BD45285G-TR Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. This IC power shares lots of benefits with other Voltage Detector products. When a supply voltage of 4.8V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. The power management belongs to the Power Management Circuits subcategory. 5 pins are present in total in this power management. This power management system has 5 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. The supply voltage (Vsup) should not exceed 10V volts in this IC power. A Surface Mount mounting type is recommended. You should set the supervisor's temperature during -40°C~105°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BD45, the base power ics number. The maximum supply temperature that PMIC chip can work with is 2.85μA. A PMIC from the well-known BD45xxx series of products is being offered here.

BD45285G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD45285G-TR Applications

There are a lot of ROHM Semiconductor BD45285G-TR Voltage Supervisors applications.

• Data storage applications
• Dash board
• Electrical fire monitoring system
• Cloud computing
• Insulation fault location system
• FPGA design
• Multi-voltage system
• Computer applications
• Power distribution systems of ICU
• Analog circuit