BD46265G-TR Overview

As you can see, this power management is mounted through 5 terminals. A Tape & Reel (TR) package is used to package the power management. There are 1 functions included in this PMIC so that you can refer to them. A series of 1 channels can be found on this supervisor. IC management is packaged as a SC-74A, SOT-753 package. This IC power shares lots of benefits with other Voltage Detector products. IC management conducts in a 4.6V-voltage supply. When a supply voltage of 1 is applied to the power ic, it conducts. Using Surface Mount, IC management is mounted. It is possible to subcategorize this power ic as a Power Management Circuits chip. There are a total of 5 pins on power management. This power management has 5 pins. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 950mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 9.5V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. The supervisors should be set to the following temperature: -40°C~105°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. A maximum supply temperature of 2.85μA can be used. As you may know, this PMIC comes from the well-known BD46xxx series product line.

BD46265G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD46265G-TR Applications

There are a lot of ROHM Semiconductor BD46265G-TR Voltage Supervisors applications.

• Automotive power systems
• Power distribution systems of operating room
• Leakage current detection
• Cloud computing
• Solar power charger
• Electronics installed in the vehicle
• Battery-powered equipment
• Consumer electronics
• Electric heating appliances
• Leakage protection