BD46445G-TR Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. A series of 1 channels can be found on this supervisor. Please refer to power management for SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Voltage Detector line. During operation, the power ic is supplied with a voltage of 6.4V. When a supply voltage of 1 is applied to the power ic, it conducts. By Surface Mount, IC management has been mounted. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 5. There are 5 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 950mV, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 9.5V volts in this IC power. A Surface Mount mounting type is recommended. This range of temperature should be set for the supervisors: -40°C~105°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. You can always use BD46, the base supervisor number, to search for similar PMICs of the manufacturer. The maximum supply temperature is 3.15μA. A PMIC from the well-known BD46xxx series of products is being offered here.

BD46445G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD46445G-TR Applications

There are a lot of ROHM Semiconductor BD46445G-TR Voltage Supervisors applications.

• Insulation fault location system
• Power distribution systems of operating room
• DVR
• Battery cars
• Detection of phase loss
• Household appliances
• Medical-specific insulation monitor
• Detection of phase imbalance
• Efficient information transmission
• Radio