BU4927FVE-TR Overview

There are 5 terminals connected to this power management, which makes it easy to mount. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. IC management is packaged as a SOT-665 package. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The supervisor is always powered by a 2.4V volt supply. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. The power management belongs to the Power Management Circuits subcategory. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. In order for this IC power to function, the supply voltage (Vsup) cannot be less than 700mV. The maximum supply voltage (Vsup) in this PMIC should not exceed 7V volts. Mounting type Surface Mount is recommended. The supervisors should be set to the following temperature: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. There is a supply current of 550nA for the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to BU4927, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.23μA.

BU4927FVE-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4927FVE-TR Applications

There are a lot of ROHM Semiconductor BU4927FVE-TR Voltage Supervisors applications.

• Household appliances
• Military electronics
• Multi-voltage system
• Personal computers
• Telecommunications equipment
• Dash board
• Leakage protection
• Radar
• Low voltage/high power - AI, GPU
• Medical-specific isolation transformer