SI5335A-B05540-GM Overview

A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. This clock generator ic can sustain 260 degrees of temperature during reflowing. In it, there are 24 terminations to be found. To operate this time clock generator, 1.8V voltage should be applied. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would be possible to supply this clock PLL with 1.98V of power. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. For safety reasons, this frequency synthesizer should have a voltage supply above 1.71V. A frequency generator that runs over 85°C may cause ha85°Cards. For the clock, clock generator's output frequency should not exceed 350MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. The frequency generator has a ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY feature to improve the output of clock signals.

SI5335A-B05540-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B05540-GM Applications

There are a lot of Silicon Labs SI5335A-B05540-GM Clock Generators applications.

• Reference signals to RF systems
• Radiotelephones
• High-speed optical transport network (OTN)
• Camera systems
• Antenna automatic tracking
• Deep space exploration
• Broadcast communication
• Signal modulation and demodulation
• Quenching?
• Bit synchronization