SI5335A-B08658-GM Overview

The Tray method is used for packaging clock ICs. In the 24-VFQFN Exposed Pad package, there is an embedded clock generator. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 24 terminations. The supply voltage of 1.8V allows for high efficiency. The Surface Mount allows this electrical component to be easily installed on the panel. This clock generator would require a maximum supply voltage of 1.98V. The number of uPs/uCs/PEripheral ICs contained in this clock generator is CLOCK GENERATOR, PROCESSOR SPECIFIC. Keeping the supply voltage for this frequency synthesizer above 1.71V is recommended for safety reasons. Whenever the frequency generators's operating temperature exceeds 85°C, ha85°Cards may occur. For the clock, clock generator's output frequency should not exceed 350MHz. If the ambient temperature is below -40°C, the clock PLL may not start up. ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY can also be founded when using frequency generators.

SI5335A-B08658-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335A-B08658-GM Applications

There are a lot of Silicon Labs SI5335A-B08658-GM Clock Generators applications.

• Mechanical devices
• Modems
• Picocells, femtocells and small cells
• Various decoding circuits
• Satellite navigation communication
• Bit synchronization
• Smartphones
• Digital logic circuits
• Symbol synchronization
• Clock recovery