SI5335B-B07310-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. The 24-VFQFN Exposed Pad package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. 24 terminations can be found in frequency generators. For this clock generator ic, a voltage of 1.8V is required. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. It would take a maximum supply voltage of 1.98V to operate this time clock generator. RF synthesizer incorporates CLOCK GENERATOR, PROCESSOR SPECIFIC UPUs, PCs, and peripheral IC's. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. In addition, the PLL may cause ha85°Cards once the temperature is set higher than 85°C. The clock generator ic can synthesi200MHze a high-quality clock output frequency of 200MHz. If the ambient temperature is below -40°C, the frequency generator may not start. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.

SI5335B-B07310-GMR Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335B-B07310-GMR Applications

There are a lot of Silicon Labs SI5335B-B07310-GMR Clock Generators applications.

• Automatic test equipment
• Threshold extension
• Set-top boxes
• Coherent detection of the signal
• Motor speed controls
• Cell phones
• Laptops
• VSAT (Small Ground Satellite Station)
• Ports
• Local oscillator source in receiver