SI5335B-B08010-GMR Overview

The Tape & Reel (TR) method is used for packaging clock ICs. There is a clock generator embedded in the 24-VFQFN Exposed Pad package. When reflowed, this frequency generator can withstand a maximum temperature of 260. In it, there are 24 terminations to be found. The supply voltage of 1.8V allows for high efficiency. Because of the Surface Mount, clock PLL can be easily mounted on the panel. 1.98V would be the maximum supply voltage for this clock generator. The uPs/uCs/Peripheral IC clock generator incoporates is CLOCK GENERATOR, PROCESSOR SPECIFIC. In order to maintain safety, this frequency generator should be supplied with voltages above 1.71V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. The clock PLL can synthesi200MHze a clock frequency of 200MHz with high quality. If the ambient temperature is below -40°C, the clock PLL may not start up. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.

SI5335B-B08010-GMR Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 200MHz

SI5335B-B08010-GMR Applications

There are a lot of Silicon Labs SI5335B-B08010-GMR Clock Generators applications.

• Wireless infrastructure
• Motor speed controls
• Antenna automatic tracking
• Signal demodulation
• Digital circuits
• Various decoding circuits
• Frequency synthesis
• Digital HDTV systems
• Electronic equipment
• Set-top boxes