This clock IC is packaged using the Tube method. This clock generator is embedded in the 16-TSSOP (0.173, 4.40mm Width) package. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of 260. 16 terminations can be found in frequency synthesizer. A voltage of 1.8V should be applied to this electronic frequency generator. A clock generator's input is called LVCMOS, Crystal and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. 230MHz is the maximal value for normal operation. Thanks to the Surface Mount, this electric component can easily be installed on a panel. As far as the supply voltage is concerned, clock PLL can be used with 1.7V~1.9V. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The RF synthesizer is compatible with LVCMOS logic levels. It has been classified as a Clock/Frequency Synthesizer electronic part, which means that it is a semiconductor. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. According to the base part number, its related parts can be founded. A 16 pin is available on the PLL. There is a maximum supply voltage of 1.8V that electronic frequency generator can handle. The output frequency can be amplified as high as possible with its 5 signal outputs. At 160MHz, frequency synthesizer achieves high efficiency. There are 2 elements in this clock generator which has a low jitter performance. The frequency synthesizer combines clock logic function Clock with input data.
CDCEL925PW Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Supply voltage of 1.8V Operating supply voltage of 1.8V
CDCEL925PW Applications
There are a lot of Texas Instruments CDCEL925PW Clock Generators applications.