SI5335C-B06011-GM Overview

As a clock IC, it uses the Tray package. The 24-VFQFN Exposed Pad package embeds this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 24 terminations found in the file. To operate this time clock generator, 1.8V voltage should be applied. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 1.98V is the maximum supply voltage needed by this time clock generator. Incorporating CLOCK GENERATOR, PROCESSOR SPECIFIC uPs/uCs/Peripheral ICs, this RF synthesizer features CLOCK GENERATOR, PROCESSOR SPECIFIC. A maximum voltage of 1.71V should be used for this frequency generator for safety reasons. Whenever the operating temperature for the PLL exceeds 85°C, it may become ha85°Cardous. Synthesi350MHzing a clock output frequency of 350MHz is possible with this clock-generator. If the ambient temperature is below -40°C, the clock PLL may not start up. The RF synthesizer features ALSO OPERATES AT 2.5V AND 3.3V NOMINAL SUPPLY for improved clock signal output.

SI5335C-B06011-GM Features

Available in the 24-VFQFN Exposed Pad
Supply voltage of 1.8V
Output clock frequency (Max) of 350MHz

SI5335C-B06011-GM Applications

There are a lot of Silicon Labs SI5335C-B06011-GM Clock Generators applications.

• Multiplexing communication
• PMR (Professional Mobile Radio)
• Antenna automatic tracking
• Microwave point-to-point systems
• Test and instrumentation equipment
• Wi-Fi routers
• Broadcast communication
• Jitter reduction
• Radiotelephones
• Coherent carrier tracking